| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
acknowledged
A link starts at 1,200 bytes; once an RTT is known it sends a PING padded
to 1,452 (DPLPMTUD, RFC 8899), alone and with the don't-fragment bit,
and uses that size once it is acknowledged. A probe lost is no
congestion; it is tried again a second on, three times, then ten minutes
on. GSO is asked for each burst (a control message), not the socket, so
a packet sent alone is never cut. CUBIC counts in the datagram.
On loopback packets fall by 19-27%; the CPU a record falls 13% at 1 KiB
and 7% at 16 KiB; in the simulator of a 50 Mbit/s path with 1% loss the
goodput rises from 6.1 to 7.0 Mbit/s (5%: 2.3 to 3.0).
|
| |
|
|
|
|
|
|
|
|
| |
links.c was a second implementation of the packet format; each device is
now a PureLinkSender on a socket of its own, keyed with a secret made
outside (pure_link_sender_shared: a key kept elsewhere, or a test's
many). M1 (1k, 10k) and M2 (10k, kill -9) pass with it: no silent step,
caught up in 0.2 s, every order applied once; the slowest store after
the restart is now the sender's 1 s wait for a word of the save
(STORED_WAIT), where the old devices tried again after 200 ms.
|
| |
|
|
|
| |
libpure-link.a holds them; pure-serve and the M5 harness link it instead
of naming its source files.
|
|
|
M1 of design 011. A Pure node allows 1,000 to 1,000,000 senders; each
sends one order and, once told it is stored, rests. At rest a link costs
the node 132 bytes (the sender allowed, 73; its number heard, about 60)
and no transport state; with a million the node runs in 139 MB. A quinn
0.11 service holding the same exchange's clients connected at rest costs
38,106 bytes a connection: 289 times as much, past the design's 1/100.
A link at rest takes its next record in 0.56 ms to stored, one X25519 on
the node included; a new QUIC connection takes 1.06 ms and 2.8 times the
receiver's CPU, without storing.
research/experiments/019-idle-links: links.c, many senders written from
serve/link.h's packet format alone (a second implementation), and the
quinn service and clients (quic/, built offline); run.py makes both
measurements.
|
